对于以下格式的日志，制作可以迅速分析日志的工具软件，提供日志模式识别和学习功能，对于学习产生的学习库，可以用作日志校验。
[2024-06-18 17:14:49.340] .100 –SBC–: —————————————————————————————-
[2024-06-18 17:14:49.340] .100 –SBC–: PlanB Resp Triggers:18 ECG Triggers:0 Pulse Triggers:0
[2024-06-18 17:14:49.340] .100 –SBC–: Packets:2804 Bytes:86924 Skipped Bytes:0
[2024-06-18 17:14:49.340] .100 –SBC–: Total Resp Triggers:3938 Total ECG Triggers:0
[2024-06-18 17:14:49.340] .100 –SBC–: Total Pulse Triggers:0 Total Packets:145713
[2024-06-18 17:14:49.340] .100 –SBC–: Total Received Bytes:4517103 Total Skipped Bytes:0
[2024-06-18 17:14:49.340] .100 –SBC–: —————————————————————————————-
[2024-06-18 17:15:01.705] .111 dbus[274]: [system] Successfully activated service ‘org.freedesktop.timedate1’
[2024-06-18 17:10:43.527] .144 –MDU–: (4) TID(1199) mimLib.c(113)(getZboVoltage):Zbo voltage:9.1858.
[2024-06-18 17:07:41.252] .1 –CUI.exe–: (4) TID(11612) ImgWindow.cpp(4400)(CImgWindow::ReadImage): – duration = 32.0578 ms.
[2024-06-18 16:39:59.861] .100 kernel: VME: vme_open()
[2024-06-18 16:39:59.861] .100 kernel: VME: vme_ioctl(VMECTL_MASTER_WINDOW_REQUEST) WindowPhysicalAddr=0×44000000 WindowSize=0×20000000
[2024-06-18 16:40:01.536] .111 rsyslogd: [origin software=“rsyslogd” swVersion=“8.16.0” x-pid=“959” x-info=“http://www.rsyslog.com”] start
[2024-06-18 16:40:01.536] .111 rsyslogd-2222: command ‘KLogPermitNonKernelFacility’ is currently not permitted - did you already set it via a RainerScript command (v6+ config)? [v8.16.0 try http://www.rsyslog.com/e/2222 ]
[2024-06-18 16:40:01.536] .111 rsyslogd: rsyslogd’s groupid changed to 108
[2024-06-18 16:40:01.536] .111 rsyslogd: rsyslogd’s userid changed to 104
[2024-06-18 16:40:02.372] .100 kernel: VME: Successfully attached to interrupt level=15, vector=0×0 flags=0×1, pid=3810
[2024-06-18 16:40:02.372] .100 –SBC–: (4) TID(3810) RTBDConnector_SpecII.cpp(867)(Register_SpecII_Boards):Entering Register_SpecII_Boards
[2024-06-18 16:40:02.372] .100 –SBC–: (1) TID(3810) RTBDConnector_SpecII.cpp(947)(Register_SpecII_Boards):regAddr: 0×971de000
[2024-06-18 16:40:02.373] .100 –SBC–: (4) TID(3810) RTBDConnector_SpecII.cpp(954)(Register_SpecII_Boards): VME slot 01 empty at 0×971DE000
[2024-06-18 16:40:02.373] .100 –SBC–: (1) TID(3810) RTBDConnector_SpecII.cpp(947)(Register_SpecII_Boards):regAddr: 0×9725e000
[2024-06-18 16:40:02.373] .100 –SBC–: (4) TID(3810) RTBDConnector_SpecII.cpp(960)(Register_SpecII_Boards):VME slot 02 FOUND at 0×9725E000
[2024-06-18 16:40:02.373] .100 –SBC–: m_pi24REG: 0×9715D000 configSpaceWindowMap: 0×9715D000
[2024-06-18 16:40:02.373] .100 –SBC–: m_pi32REG: 0×97C5D000 runtimeWindowMap: 0×97C5D000
[2024-06-18 16:40:02.373] .100 –SBC–: RTBD_VME_DT_START: 0xA0000000 dmaWindowMap: 0×97BDD000
[2024-06-18 16:40:02.373] .100 –SBC–: RTBD_ADDR_STEP_DMA: 0×00100000 RTBD_ADDR_STEP_A32: 0×00100000 RX_CHANNELS_PER_BOARD: 16
[2024-06-18 16:40:02.373] .100 –SBC–: RTBD_BoardType: 2
[2024-06-18 16:40:02.373] .100 –SBC–: creating TX board for vme slot 02
[2024-06-18 16:40:02.373] .100 –SBC–: RTBDIO_SpecII_TX ctor: vmeBackplaneSlotNum = 0×02
[2024-06-18 16:40:02.373] .100 –SBC–: Already in Application Mode, not rebooting
[2024-06-18 16:40:02.373] .100 –SBC–: TX is running App Image. Running: 001.014.000 ID Prom: 001.014.000
[2024-06-18 16:40:02.373] .100 –SBC–: TX: boardID(32;32) baseAddress(0×90000000;0×90000000) blockTransferAddr(0xB0000000,0xB0000000)
[2024-06-18 16:40:02.453] .100 –SBC–: Board Type: TX slot: 02 DEPRECATED id: 32
[2024-06-18 16:40:02.547] .100 –SBC–: (1) TID(3810) RTBDIO_SpecII.cpp(1055)(DebugPrintVars):m_RxChannelBoard: 12 RTBD_ADDR_STEP_DMA: 0×100000 RTBD_ADDR_STEP_A32: 0×100000
[2024-06-18 16:40:02.547] .100 –SBC–: RX: boardID(system ch 12; board # 00) baseAddress(0×80C00000;0×80C00000) blockTransferAddr(0xA0C00000)
[2024-06-18 16:40:02.547] .100 –SBC–: creating RX board for vme slot 04, RX board number 13
[2024-06-18 16:40:02.547] .100 –SBC–: (1) TID(3810) RTBDIO_SpecII.cpp(1055)(DebugPrintVars):m_RxChannelBoard: 13 RTBD_ADDR_STEP_DMA: 0×100000 RTBD_ADDR_STEP_A32: 0×100000
[2024-06-18 16:40:02.547] .100 –SBC–: RX: boardID(system ch 13; board # 00) baseAddress(0×80D00000;0×80D00000) blockTransferAddr(0xA0D00000)
[2024-06-18 16:40:02.547] .100 –SBC–: creating RX board for vme slot 04, RX board number 14
[2024-06-18 16:48:05.260] .111 –RFPM–: (4) TID(1163) rfpm.cpp(1693)(rfpm_selftest):Cal point error (+0.0086 dBm) is within expected range (+/-0.20 dBm): channel 5 dBmstep -20
[2024-06-18 16:48:05.273] .111 –RFPM–: (4) TID(1163) rfpm.cpp(1713)(rfpm_selftest):Cal point error (-0.0642 dBm) is within expected range (+/-1.00 dBm): channel 5 dBmstep -15
[2024-06-18 16:48:05.285] .111 –RFPM–: (4) TID(1163) rfpm.cpp(1693)(rfpm_selftest):Cal point error (+0.0174 dBm) is within expected range (+/-0.20 dBm): channel 5 dBmstep -10
[2024-06-18 16:48:05.219] .111 –RFPM–: (4) TID(1163) rfpm.cpp(1693)(rfpm_selftest):Cal point error (+0.0192 dBm) is within expected range (+/-0.20 dBm): channel 5 dBmstep -40
[2024-06-18 16:48:05.229] .111 –RFPM–: (4) TID(1163) rfpm.cpp(1713)(rfpm_selftest):Cal point error (+0.0214 dBm) is within expected range (+/-1.00 dBm): channel 5 dBmstep -35
[2024-06-18 16:48:05.239] .111 –RFPM–: (4) TID(1163) rfpm.cpp(1693)(rfpm_selftest):Cal point error (+0.0274 dBm) is within expected range (+/-0.20 dBm): channel 5 dBmstep -30
[2024-06-18 16:48:05.249] .111 –RFPM–: (4) TID(1163) rfpm.cpp(1713)(rfpm_selftest):Cal point error (+0.1149 dBm) is within expected range (+/-1.00 dBm): channel 5 dBmstep -25
[2024-06-18 16:48:05.250] .100 sshd[3961]: WARNING: /usr/etc/moduli does not exist, using fixed modulus
[2024-06-18 16:48:13.880] .122 dropbear[3015]: Exit (root): Exited normally
[2024-06-18 16:48:13.920] .122 dropbear[3018]: Child connection from 192.168.111.1:60691
[2024-06-18 16:48:14.596] .122 dropbear[3018]: Password auth succeeded for ‘root’ from 192.168.111.1:60691
[2024-06-18 16:48:24.275] .1 –DPC_64.exe–: (1) UWInterface.cpp(340)(I_StartThread):[ThrTr] created thread 392
[2024-06-18 16:48:24.275] .1 –DPC_64.exe–: (1) UWInterface.cpp(340)(I_StartThread):[ThrTr] created thread 396
[2024-06-18 16:48:24.275] .1 –DPC_64.exe–: (1) UWInterface.cpp(340)(I_StartThread):[ThrTr] created thread 400
[2024-06-18 16:48:24.275] .1 –DPC_64.exe–: (1) UWInterface.cpp(340)(I_StartThread):[ThrTr] created thread 404
[2024-06-18 16:48:24.275] .1 –DPC_64.exe–: (1) UWInterface.cpp(340)(I_StartThread):[ThrTr] created thread 408
[2024-06-18 16:48:24.275] .1 –DPC_64.exe–: (1) UWInterface.cpp(340)(I_StartThread):[ThrTr] created thread 412
[2024-06-18 16:48:35.835] .122 –MRC–: (4) TID(3154) magSenLib.c(296)(magSenGCDrvInstall):Installed driver for GC MFC16.
[2024-06-18 16:48:35.888] .122 –MRC–: (4) TID(3154) magSenLib.c(459)(magSenGradCoilTempConv):Temperature : 23.20
[2024-06-18 16:48:35.889] .122 –MRC–: (4) TID(3154) procHdAbs.c(72)(procHdAbsThread):started…
[2024-06-18 16:48:37.436] .122 –MRC–: (4) TID(3154) couchInfo.c(665)(couchEEPromInit):Read couch configuration
[2024-06-18 16:48:37.776] .1 “==== Waiting for MRC thread count exceed 2, current 2”
[2024-06-18 16:48:38.316] .1 “==== MRC ready”
[2024-06-18 16:48:38.905] .1 “==== starting Remote SC on 192.168.111.100”
[2024-06-18 16:48:39.030] .100 sshd[3995]: WARNING: /usr/etc/moduli does not exist, using fixed modulus
[2024-06-18 17:02:41.390] .1 –CUI.exe–: (4) TID(11612) ImgWindow.cpp(4400)(CImgWindow::ReadImage): – duration = 34.8388 ms.
[2024-06-18 17:02:41.390] .1 –CUI.exe–: (4) TID(11612) ImgWindow.cpp(4400)(CImgWindow::ReadImage): – duration = 24.0767 ms.
[2024-06-18 17:02:41.390] .1 –CUI.exe–: (3) TID(11612) MainPanel.cpp(1823)(CMainPanel::SetButtonStatus):CMainPanel::SetButtonStatus SCAN_ADJUST Tab Pressed.
[2024-06-18 17:06:03.176] .1 –CUI.exe–: (1) TID(11612) ImgData.cpp(3371)(CImgData::SetDIB):Error, Height or Width of image DIB is 0. DIB Width = 100, DIB Height = 0, Image Width = 3600, Image Height = 28, Zoom Rate = 0.027500
[2024-06-18 17:06:03.259] .1 –CUI.exe–: (4) TID(11612) ImgWindow.cpp(4400)(CImgWindow::ReadImage): – duration = 28.3015 ms.
[2024-06-18 17:06:03.259] .1 –CUI.exe–: (1) TID(11612) ImgData.cpp(3371)(CImgData::SetDIB):Error, Height or Width of image DIB is 0. DIB Width = 100, DIB Height = 0, Image Width = 3600, Image Height = 28, Zoom Rate = 0.027500
[2024-06-18 17:06:03.344] .1 –CUI.exe–: (4) TID(11612) ImgWindow.cpp(4400)(CImgWindow::ReadImage): – duration = 46.5652 ms.
[2024-06-18 17:06:03.344] .1 –CUI.exe–: (1) TID(11612) ImgData.cpp(3371)(CImgData::SetDIB):Error, Height or Width of image DIB is 0. DIB Width = 100, DIB Height = 0, Image Width = 3600, Image Height = 28, Zoom Rate = 0.027500
[2024-06-18 17:06:03.417] .1 –CUI.exe–: (4) TID(11612) ImgWindow.cpp(4400)(CImgWindow::ReadImage): – duration = 45.2735 ms.
[2024-06-18 17:06:03.417] .1 –CUI.exe–: (1) TID(11612) ImgData.cpp(3371)(CImgData::SetDIB):Error, Height or Width of image DIB is 0. DIB Width = 100, DIB Height = 0, Image Width = 3600, Image Height = 28, Zoom Rate = 0.027500
[2024-06-18 17:06:03.480] .1 –CUI.exe–: (4) TID(11612) ImgWindow.cpp(4400)(CImgWindow::ReadImage): – duration = 47.3749 ms.
